Valvesonly Europe is one of the largest Stainless Steel Ball Valve Manufacturer in Italy with manufacturing and warehouse in Italy and Germany. We supply valves globally with our global presence.

This valve stop the flow of liquid coming through the line. There are two main type of material, Metal Ball Valve and Stainless steel. By non-industrial applications Stainless steel continue to gain more attention.

Stainless as a material is much more corrosion-resistant than brass. This is an important thing to pay attention to, especially when it comes to valves. Because valves are meant to open and close, corrosion can cause big issues. If there is too much corrosion, this may cause a Ball Valve to break or become unable to move.

Industry that use Ball valve:
• Chemical industry.
• Oil industry.

Advantages of Ball valve:
• Can handle all fluid types.
• Ball valve provides leak proof service.
• Gate valves open and close quickly.

Stainless Steel Ball Valves will hold up much better to harsher water types. This will ensure a longer lasting valve.

Body material: carbon steel, CF8M, WCB, CF8, Stainless Steel [SS316, SS304, SS316L, SS904L, CF8, CF8M, F304, F316, F31L, F51, F3, F55, F91], WCB, WC6, SS304, SS316, DUPLEX STEEL
Class: 150-2500
Size: 1/2”- 48”.
Operations: Lever operated ball valve, electric actuated ball valve, pneumatic actuated ball valve, gear operated ball valve
Ends: Flanged, butt weld, socket weld, threaded
Operations: Lever, Handwheel, Electric, Pneumatic

Reach us to know more details!!

Visit Here: https://www.valvesonlyeurope.com/product-category/investment-casting-ball-valve/




Know more about valves?

Control valve: Valvesonly is the largest Control valve manufacturer in USA with strong customer support and R&D. It is a power operated valve which is used to control the flow of medium such as steam, gas, oil and water. A control valve modulates the flow at varying degrees between minimal flow and full capacity flow in response to a signal from a control device.



Check valve: These valves perform traditional functions in a smarter way, no matter where you are using them. To prevent the reverse flow of gas, fluid, and air in case of brake-down, check valves are certainly the best product in the industry. As an emerging Check valve manufacturer in USA, we focus on delivering your concerns with the best practices.

Safety valve: A safety valve protects the system against over pressure. Over pressure mainly occurs when the pressure exceeds the Maximum Allowable Working Pressure. When compared to relief valves, Safety valves can open very quickly as it opens from a set pressure. As an emerging Safety valve manufacturer in USA, we focus on delivering your concerns with the best practices.

Gate valve: Valvesonly is the largest Gate valve manufacturer in USA with strong customer support. A Gate valve generally is used to shut off the flow in the valve rather than for flow regulation. There is no obstruction in the flow path in this valve which results in very low flow resistance. It provides zero leakage. These valves operate either in fully open or fully closed position.

Globe valve: We are one of the largest Globe valve manufacturer in USA. A Globe valve is primarily used to start, stop and regulate the flow of the medium which passes through the valve. They can be used for isolation as well as throttling services. During the opening and closing of the valve, the disc in the valve moves perpendicularly to the seat.

Butterfly valve: In this type of valve, a disc is attached to the rod. The disc allows the fluid to flow through the valve. The main components of butterfly valve are the body, disc, stem, and seal. Large butterfly valve comes with a gear box where the hand wheel by gears is connected to the stem. Being the leading Butterfly valve manufacturer in USA, we even customise the valves as per your requirement.



Plug valve: A Plug Valve has a cylindrical or cone shaped plug which rotates inside the valve body to control the flow of medium. They are used for full flow services that are either fully open or fully closed. They are generally not designed for regulation of the medium. The main advantage of the plug valve is that it can be repaired or cleaned without removing the valve body from the system. As a reliable Plug valve manufacturer in USA, Valvesonly is committed to delivering durable, high-performing, advanced and powerful plug valves for our customers.



Visit here for more details: https://valvesonly.com/