Concorde Valves and Automations One of The leading Manufacturer, Supplier and Exporters of Various Types of Valves like Kitz valve, Pneumatic Operated Ball Valves, Pneumatic Actuated Ball Valves, Pneumatic Ball Valves, Pneumatic Butterfly Valves
Pneumatic Operated Butterfly Valves, Y Type Control Valve, Y Type Pneumatic Control Valve, Diaphragm Operated Solenoid Valve,
Pilot Operated Diaphragm Valve, Roto seal coupling, non return valve disc type, non slam disc check valve

The pneumatic operated ball valves comes in two variations- 2 Piece Design & 3 piece design

2 Piece Design Pneumatic operated

Two-piece ball valves are some of the most common ball valves used. As the name suggests, the two piece ball valve consists of two pieces, one piece that has one end connection and the body. The second piece fits into the first, holds the trim in place and includes the second end connection. Once installed these valves typically cannot be repaired unless they are removed from service. The main advantage of a two piece design ball valves is, the fluid resistance is small. The resistance coefficient is equal to that of the pipe of the same length. Simple structure, small size, lightweight.

3 Piece Design Pneumatic operated

Three-piece ball valves consist of three pieces: two end caps and a body. The end caps are typically threaded or welded or flanged end, the main body section may be easily removed for cleaning or repair without removing the end caps.

Features Of Pneumatic Actuator
Indicator: It is a mounting accessory with a Namur mounting which is standard for all pneumatic operators.
Pinion: Pinion offers maximal wear resistance to the valve. It is made of accustomed alloy steel and is plated with 15um nickel to reduce friction.
ActuatorBody: It is made of anodized aluminum ejection of which gives protection against corrosion and reduce the piston friction.
End Caps: These caps offers maximum resistance against embryonic corrosive elements.
Pistons: The aluminum pistons are contoured with high quality rings and guides. The piston design and the twin rack develop a continuous torque on all operators.
Travel Adjustment: There are two external adjustment bolts in the actuator that offers a standard adjustment of 5 degrees in both open and closed positions.
High performance springs: The preloaded high tensile steel springs providelong services with the corrosion resistant Epoxy coated on it.
Bearing and guides: This provides a long life to the actuator by offering minimum friction.
O-rings: These rings are for execution of trouble-free operation at standard temperature ranges.

For More Information About PNEUMATIC BALL VALVES

Concorde Valves and Automations

Contact us - 7972950801
Email us - sales@concordevalves.com