Valvesonly Europe is the leading Bellow Sealed Globe Valve Manufacturer in Germany. Bellow Sealed Globe Valve could be a specially designed valve appropriate to be used in industries handling a venturous medium wherever even minute leakages may be very essential. A bellow seal globe valve is operated between fluids and therefore the air. At an identical time, the valve will stop fluids leaky into the air and guarantee zero runs of pipelines.

The bottom of the bellows is welded to the valve stem of the bellow seal globe valve to avoid method fluids eating away the valve stem. At the identical time, the opposite aspect of bellows forms a static seal between the valve body and therefore the bonnet.

With the double seal structure, the bellow seal globe valve will avoid run thanks to the packing of valve stem although bellows area unit broken. The structure that bellows is welded to the valve stem guarantees stable operating performance and might avoid the vibration of the valve stem caused by the vibration of the valve plug.

Features and Advantages of Bellow sealed globe valve:
• Designed and qualification tested for top pressure/temperature applications.
• A plug is often connected to the house higher than the bellows to observe performance.

In general, the bellow seal globe valve is broken thanks to the mechanical squeeze rather than the operation throughout production. the world valve has bellows with numerous coatings and completely different grades of snap. However, these bellow seal globe valves have similar wear and tear, which may not be seen from outside and resulted from the adhesion of particles and therefore the surface corrosion because of media within the valve. Thus, in daily follow bellows area unit needed to get replaced before their operation lives finish.

Industries of Bellow Seal Globe Valve is
• Sewage Industry
• Constructions Industry
• Food Industry
• Electric power Industry
• Medicine Industry
• Fluid Pipeline of liquid Industry
• Metallurgy and textile Industry

Valvesonly Europe use many types of material and sizes to also produce custom bellow seal globe valve

Body material: –Cast Steel (A216 WCB, WCC, LCB, LCC, WC6, WC9), Ductile Iron, Stainless Steel [SS316, SS304, SS316L, SS904L, CF8, CF8M, F304, F316, F31L, F51, F3,F55, F91 ] , WCB, WC6, SS304, SS316, DUPLEX STEEL
Size – DN15 –DN1200
Nominal pressure – PN10 – PN450
Class: 150 – 2500
Ends – butt welded, socket welded, threaded, flanged
Applications: pneumatic actuated bellow seal Globe Valve, electric actuated bellow seal Globe Valve, hand-wheel actuated bellow seal Globe Valve, gear actuated bellow seal Globe valve

Reach us to know more details!!

Visit website: https://www.valvesonlyeurope.com/product-category/bellow-seal-globe-valve/




Valvesonly Europe is the largest valve manufacturer in Italy. Our Valves are specially designed to meet the needs of the customers from the toughest weather conditions to the harshest chemicals and they require an extremely low maintenance. Our valves provide resistance and they have extended life to meet the needs of various industries. We supply various types of valves which include custom design valves. We have been supplying high quality goods in a consistent way throughout the years. We also follow strict internal standards for manufacturing our valves.

Below are some of the industrial valves:
• Control valve
• Check Valve
• Safety Valve
• Gate Valve
• Globe Valve
• Butterfly valve
• Plug valve

Control valve: Valvesonly Europe is the largest Control valve manufacturer in Italy with strong customer support and R&D. It is a power operated valve which is used to control the flow of medium such as steam, gas, oil and water. A control valve modulates the flow at varying degrees between minimal flow and full capacity flow in response to a signal from a control device.

Check valve: These valves perform traditional functions in a smarter way, no matter where you are using them. To prevent the reverse flow of gas, fluid, and air in case of brake-down, check valves are certainly the best product in the industry. As an emerging Check valve manufacturer in ITALY, we focus on delivering your concerns with the best practices.

Safety valve: A safety valve protects the system against over pressure. Over pressure mainly occurs when the pressure exceeds the Maximum Allowable Working Pressure. When compared to relief valves, Safety valves can open very quickly as it opens from a set pressure. As an emerging Safety valve manufacturer in Italy, we focus on delivering your concerns with the best practices.

Gate valve: Valvesonly Europe is the largest Gate valve manufacturer in Italy with strong customer support. A Gate valve generally is used to shut off the flow in the valve rather than for flow regulation. There is no obstruction in the flow path in this valve which results in very low flow resistance. It provides zero leakage. These valves operate either in fully open or fully closed position.

Globe valve: We are one of the largest Globe valve manufacturer in Italy. A Globe valve is primarily used to start, stop and regulate the flow of the medium which passes through the valve. They can be used for isolation as well as throttling services. During the opening and closing of the valve, the disc in the valve moves perpendicularly to the seat.

Butterfly valve: In this type of valve, a disc is attached to the rod. The disc allows the fluid to flow through the valve. The main components of butterfly valve are the body, disc, stem, and seal. Large butterfly valve comes with a gear box where the hand wheel by gears is connected to the stem. Being the leading Butterfly valve manufacturer in Italy, we even customize the valves as per your requirement.

Plug valve: A Plug Valve has a cylindrical or cone shaped plug which rotates inside the valve body to control the flow of medium. They are used for full flow services that are either fully open or fully closed. They are generally not designed for regulation of the medium. The main advantage of the plug valve is that it can be repaired or cleaned without removing the valve body from the system. As a reliable Plug valve manufacturer in Italy, Valvesonly Europe is committed to delivering durable, high-performing, advanced and powerful plug valves for our customers.

Available materials: Ductile iron, Monel, WCB,WCC, WC6, LCB, LCC, SS304,SS316, CF8, CF8M, CF3, CF3M, Aluminium Bronze, Bronze, Brass, F55, F53, F51, Inconel, Incoloy, Titanium
Class: 150 to 2500
Nominal Pressure: PN6 to PN450
Size: ½” to 80”
Ends: Flanged, Wafer, Lug, Buttweld, Socketweld, Threaded

Visit here for more details: https://www.valvesonlyeurope.com/