Valvesonly Europe is a prestigious organization of Alloy 20 valve Manufacturer in Italy. We offer the same in universal and national quality benchmarks at cost-effective rates to our supporters. Alloy 20 Valve is also known as Carpenter 20. Alloy 20 valve is a chromium-nickel-molybdenum combination most frequently utilized for a high concentration of sulfuric corrosive. Alloy 20 is safe to setting and chloride particle erosion, and the component of copper blocks erosion in sulfuric corrosive.

Uses of Alloy 20 Valve:

It can be utilized in marine situations, high-temperature situations, chloride, and acidic situations as well.

There are different type of Alloy 20 Valve:
• Alloy 20 Ball Valve
• Alloy 20 Butterfly Valve
• Alloy 20 Check Valve
• Alloy 20 Gate Valve
• Alloy 20 Globe Valve

Advantages of Alloy 20 Valve:
• It is versatile to an assortment of air conditions and climate making it worthy.
• They are reasonable for applications where high quality is alluring.

Alloy 20 Valve is use in many Industries like
• Pharmaceutical Industry
• Chemical Processing
• Food Processing
• Petrochemical and Refining
• Marine Industry

Some specification of Alloy20:
Body Material: Alloy 20
Class: 150 to 800
Size: 1/2? to 8?
Ends – butt welded, socket welded, threaded, flanged

Visit Us:- https://www.valvesonlyeurope.com/product-category/alloy-20-valves/


Below are some of the industrial valves:
• Control valve
• Check Valve
• Safety Valve
• Gate Valve
• Globe Valve
• Butterfly valve
• Plug valve

Control valve: Valvesonly Europe is the largest Control valve manufacturer in Italy with strong customer support and R&D. It is a power operated valve which is used to control the flow of medium such as steam, gas, oil and water. A control valve modulates the flow at varying degrees between minimal flow and full capacity flow in response to a signal from a control device.

Check valve: These valves perform traditional functions in a smarter way, no matter where you are using them. To prevent the reverse flow of gas, fluid, and air in case of brake-down, check valves are certainly the best product in the industry. As an emerging Check valve manufacturer in ITALY, we focus on delivering your concerns with the best practices.

Safety valve: A safety valve protects the system against over pressure. Over pressure mainly occurs when the pressure exceeds the Maximum Allowable Working Pressure. When compared to relief valves, Safety valves can open very quickly as it opens from a set pressure. As an emerging Safety valve manufacturer in Italy, we focus on delivering your concerns with the best practices.

Gate valve: Valvesonly Europe is the largest Gate valve manufacturer in Italy with strong customer support. A Gate valve generally is used to shut off the flow in the valve rather than for flow regulation. There is no obstruction in the flow path in this valve which results in very low flow resistance. It provides zero leakage. These valves operate either in fully open or fully closed position.

Globe valve: We are one of the largest Globe valve manufacturer in Italy. A Globe valve is primarily used to start, stop and regulate the flow of the medium which passes through the valve. They can be used for isolation as well as throttling services. During the opening and closing of the valve, the disc in the valve moves perpendicularly to the seat.

Butterfly valve: In this type of valve, a disc is attached to the rod. The disc allows the fluid to flow through the valve. The main components of butterfly valve are the body, disc, stem, and seal. Large butterfly valve comes with a gear box where the hand wheel by gears is connected to the stem. Being the leading Butterfly valve manufacturer in Italy, we even customize the valves as per your requirement.

Plug valve: A Plug Valve has a cylindrical or cone shaped plug which rotates inside the valve body to control the flow of medium. They are used for full flow services that are either fully open or fully closed. They are generally not designed for regulation of the medium. The main advantage of the plug valve is that it can be repaired or cleaned without removing the valve body from the system. As a reliable Plug valve manufacturer in Italy, Valvesonly Europe is committed to delivering durable, high-performing, advanced and powerful plug valves for our customers.

Available materials: Ductile iron, Monel, WCB,WCC, WC6, LCB, LCC, SS304,SS316, CF8, CF8M, CF3, CF3M, Aluminium Bronze, Bronze, Brass, F55, F53, F51, Inconel, Incoloy, Titanium
Class: 150 to 2500
Nominal Pressure: PN6 to PN450
Size: ½” to 80”
Ends: Flanged, Wafer, Lug, Buttweld, Socketweld, Threaded

Visit here for more details: https://www.valvesonlyeurope.com/